Profile pipes, structural channels, seamless pipes, sheets, mesh, strips, etc. - article 3, article 20, article 35, article 45, 40X, 65G, 60S2A.
Steel profile pipe - a product of square, rectangular, oval and other section, other than round.
Metal structural channel - a base of supporting structure for any construction involving a U- shaped section.
Seamless round steel pipe - a hollow cylindrical item.
ST3 - carbon steel. Pipes, stampings, tapes, wire and hardware.
ST35 - high quality carbon structural steel. Crankshafts, axles, bolts, nuts and studs.
ST45 - structural carbon quality steel. Gear shafts, gears, reduction- drive gearboxes and chain drive sprockets.
40X - structural carbon alloy steel. Gear wheels of reduction-drive gearboxes, axles, shafts, plungers, rods, crankshafts and camshafts, semi-axles, bushings.
65G - structural spring steel. Springs, leaf springs, thrust washers, brake bands, clamping and feed collets.
60S2A - structural carbon quality steel. Leaf springs and heavy duty springs.
Electric welded pipes, profile and seamless pipes, sheets, circles, strips, structural channels and corners. - 20Х13, 30Х13, 40Х13, 09Х16Н4Б, 12Х18Н10Т, 14Х17Н2, 20Х23Н18.
20Cr13 - carbon ≈ 0.2%, Cr13 - chromium ≈ 13%. Alloy, corrosion-resistant, heat- resistant steel. For high-ductility parts, subjected to shock loads, items exposed to mildly aggressive influences.
230X13 - carbon ≈ 0.3%. Alloy, corrosion-resistant steel. Cutting and measuring tools, shafts of cracking pumps, springs, parts of compressors, carburetor needles, internal parts of devices, household items and other various wear parts in mildly aggressive environments up to 450°C.
40X13 - carbon ≈ 0.4%. Alloy, corrosion-resistant steel. Increased hardness. Cutting, measuring and surgical instruments, bushings, axles, shafts, springs, leaf springs, wrist-pins, axles, carburetor needles, valve plates of compressors, blades, bands of steam turbines, and other parts operating at temperatures up to 400-450°C.
09Cr16Ni4B - carbon ≈ 0.09%, chromium ≈ 16%, nickel ≈ 4%, letter B - steel of guaranteed composition (subjected working). High chromium content - high corrosion resistance in atmospheric conditions. For the production of sheet, welded parts and high strength construction, working in contact with aggressive environments.
12Cr18Ni10Ti - carbon ≈ 0.12%, chromium ≈ 18%, nickel ≈ 10%, Ti - steel contains ≈ 1% titanium. Alloy, corrosion-resistant, heat- resistant and heat-proof. For welded items working in dilute solutions of nitric, acetic, phosphoric acids, alkalis and salts. Unstable in sulfur-containing environments. Used in cases where nickel-free steels cannot be applied.
14Cr17Ni2 - carbon ≈ 0.14%, chromium ≈ 17%, nickel ≈ 2%. Alloy, corrosion-resistant, heat- resistant steel. For parts operating in aggressive environments and at low temperatures in the chemical, aviation and other industries.
20Cr23Ni18 - carbon ≈ 0.2%, chromium ≈ 23%, nickel ≈ 18%. Alloy, heat-resistant, heat-proof steel. For parts of equipment units in chemical and oil industries, gas pipelines, combustion chambers, pipes and parts of methane conversion units, parts of coppers fastening, muffles for work at temperature up to 1100°C.
Circle, square, strip, sheet. Alloy 9KHS, CVH, KH12MF, KH12F1, 4H5MFS, 4KH5V2FS, 4KH4VMFS. High speed steel - R18, R6M5, R9K5, Р9К9, R6M5K5, Р6М4К9, R6M5F3, R9M4K8.
Tool steels for mechanical machining by pressure and cutting. The main indicator - hardness - is regulated by the amount of carbon contained in the steel and to a lesser extent additives. Divided into: alloyed (increased hardenability) and high-speed.
Alloy tool steel contains alloying elements (copper, manganese, nickel, tungsten, chromium, silicon, etc.), which significantly improves its characteristics - reduces the formation of cracks during heat treatment and increases hardening. For production of the stamping and cutting tool operating with low speed of cutting - mills, drills, taps, dies, reamers and other. Not applicable for welded structures. High durability, but relatively low.
High speed tool steels: a cutting tool operating at high cutting speeds, experiencing heat (600 to 6,500 degrees Celsius) from the friction during the use, maintains hardness and does not deform. Increase the speed of cutting by several times compared to other steels. Heat resistant, high hardness HRC 63-70 and wear resistant. At the beginning of the designation, the letter "R". The number after the letter "R" indicates the average content of tungsten (in % of the total mass).
Round stock in the form of bars with a circular cross section.
Tool square steel - metal roll in the shape representing steel bars with a square cross-section profile.
Tool strip-produced by hot rolling - a solid profile of tool steel with a section in the form of a rectangle.
Tool sheet hot and cold rolled with increased (A) and normal (B) accuracy.
Circle, tape, sheet, pipe, wire, hexagon – AMr3, AMg6, AMC, D16, L63, L68, LTs59C - 1, M1, CuBe2, CuAlgMn2, BrH- 1
AMr3- high corrosion resistance aluminium, weldable without limitations, amenable to cutting. 93.8-96 % aluminum, 3.2-3.8% magnesium, other admixtures.
AMg6 is aluminum of high ductility, but medium strength, good corrosion resistance, machinability by cutting and pressure.
AMC-aluminum corrosion- resistant, weldable without limitations, ductile, but low- strength, high electrical and thermal conductivity. 96.35-99% aluminum, 1-1. 5 % manganese, up to 0.15% admixtures.
D16 - high strength duralumin with alloyed additives of manganese. Up to 94.7% aluminum, the rest are alloyed elements: copper, magnesium, manganese, a number of admixtures.
Brass L63 - processed under pressure in the cold state, can be processed on the machine tools. Copper-62-65%, zinc-34.22-37.5 %, up to 0.5% admixtures.
LTs59C - 1 -multicomponent free-cutting brass. It is used more often as an free- cutting alloy. 57-60% copper, 37.05-42.2 % zinc, 0.8-1.9% lead and up to 0.75% admixture.
M1 is an alloy of 99.9% copper. High rates of electrical and thermal conductivity. Has electrical resistivity of 0.018 μω and after annealing decreases to 0.0175 μω.
CuBe2 - is a tinless beryllium bronze with high durability and corrosion fatigue resistance. Good anti-friction and spring properties, average heat and electrical conductivity. 96.9- 98 % copper, 1.8-2.1 % beryllium, 0.2-0.5% nickel and 0.5% admixtures.
CuAlgMn2 - a tin-less bronze with high anti-corrosive and mechanical properties. Copper 86-90, 5%; iron up to 0.5%; silicon up to 0.1%; manganese 1.5-2.5%; phosphorus up to 0.01%; aluminum 8-10%; lead up to 0.03%; zinc up to 1%; tin up to 0.1%.
BrH 1- tinless chromium bronze. Outstanding mechanical properties, high heat resistance, good anti-friction properties and electrical conductivity. Easily deformable. Copper 98.5-99.6%; chrome 0.4- 1.2%.
Bends, transitions, shutters, tees, flanges, plugs, valves, etc.
Connecting parts used in the construction and installation of various pipelines.Are used to ensure rotation, bending, tilting, tapping, changing the diameter of the pipeline and in the case of temporary non-use.
Steel pipe bends - change the direction of the flow. In the refining industry, chemical, gas, engineering , metallurgy and utilities.
Assembling of the galvanized elbows: pumps, compressors and other tools that are directly involved in the installation and construction of the pipelines.
Concentric steel transitions - smoothly connecting pipes of the different diameters. Installation of the pipelines and systems demanding the highest measure of the operating environment security (steam or hot water).
Galvanized transitions. Good anti-corrosion properties and will serve much longer than steel transitions without deformation.
Flange steel transition. To increase or decrease the diameter of the pipeline. Pressure - 1 MPa. Fluid temperature: up to 100 degrees C.
Steel t-pipes: connecting pieces with three connecting ends. For fixing pipe branches to the main line.
Steel T flange. Operating pressure 10 atmospheres. The temperature of the medium is up to 100 degrees Celsius.
Socket-weld tees. Adjusting side pipe branches of equal or smaller diameter to the main pipeline. Pressure up to 16 kg / S2 (1.6 MPa).
Steel flange elbow - changing the direction of the pipeline to 90 degrees. Made of steel, operating pressure 1 MPa.
Pipe flange - smooth finish. Made of steel, operating pressure 1 MPa The temperature of the medium up to 100 degrees Celsius.
The cross flange - for branch (crossing) of the main pipes, accession of control and measuring equipment and pipeline fittings. Made of steel, can withstand operating pressure up to 10 atmospheres. Fluid temperature: up to 100 degrees C.
Individual production is characterized by a single production of goods with occasional re-production. Applied in heavy engineering, shipbuilding, in the production of experimental samples of products, machines, instruments, prototypes. In this case, the workshop of the enterprise does not have a clear specialization, a variety of operations are performed, causing frequent reconfiguration of equipment and tools.
"Izhstal", PJSC is a manufacturer of special grades of steel, alloys and stainless steel. Produces long, calibrated and rolled sections, cold- rolled fillets, steel shaped profiles made of structural, tool, high-speed, stainless steel grades of high accuracy.
The clients of PJSC "Izhstal"
are enterprises of
automotive, aviation, oil
and mining industries,
defence complex and high-
tech engineering, tool
The enterprise manufactures details of cars, bearings, drilling rigs, high-performance cutting tool working at high temperatures and speeds of cutting, springs, and consumer goods from the metal products.
"Asha Iron & Steel Works", JSC is a compact, modern, multi-profile production of rolled steel manufactured from carbon, low-alloy, structural and alloyed steel grades.
One of Russia's largest manufactures of special alloys for the needs of the defense industry, oil and gas, chemical, nuclear, aviation and space industries.
"Asha Iron & Steel Works", JSC is the leader of the CIS market of amorphous and nano-crystalline alloys and the largest manufacturer of household and family goods made of stainless and carbon steel in Russia.
"Metallurgical plant Electrostal", JSC is the main manufacturer of the heat-resistant nickel alloy products in a wide range of brands and sizes - from wire to large forgings. Almost all grades of steels and alloys produced at the enterprises of high-quality national metallurgy are developed and implemented at "Metallurgical plant Electrostal", JSC in close cooperation with the leading institutions of the country.
The product range of the plant includes more than 2000 grades of steels and alloys.
"SMZ Arkonik" JSC is the largest enterprise for the production of aluminum semi-manufactured products in Russia.
It produces a wide range of rolling, pressing and forging products. Long-term clients of the plant are enterprises of aviation, space, packaging, shipbuilding, automotive, construction, oil and gas industry, transport engineering and other industries.
“KraMZ”, LTD for processing of aluminum and aluminum alloys. “KraMZ”, LTD manufactures flat and round ingots, the pressed profiles, rods and pipes, forgings and stampings from wide range of aluminum alloys according to the chemical structure of the Russian and foreign standards.
The production of KraMZ, LTD is supplied to the countries of the European Union, the USA, South Korea, Israel, Turkey, Australia and other countries of the world community.
"KUMZ", JSC produces aluminum and aluminum alloys ingots, flat products, profiles, welded pipes, pressed and drilled, rods, wire, stamping of any configuration, wheels for cars and trucks, heat exchangers for refrigerators, painted profiles and structures.
A large share of "KUMZ", JSC products is produced for export. Aluminum semi- manufactured products are supplied to 46 countries: USA, Canada, Brazil, France, Germany, Sweden, Finland, Italy, Spain, Greece, India, China, Taiwan, Singapore, South Korea, Australia, Turkey, etc.
“KUZOCM”, JSC produces a wide range of metal products from copper, nickel, zinc and alloys based on them. The plant is a leader in the non-ferrous metalworking industry in Russia. The products of “KUZOCM”, JSC are widely used in all industries both in Russia and abroad.
"VSMPO-AVISMA", PJSC is the world's largest producer of ingots and rolled titanium alloys. In addition, the corporation produces extruded products made of aluminum alloys, semi- finished products made of alloy steels and heat- resistant nickel-based alloys. The corporation is the leader in the global high- tech market of titanium products. It is deeply integrated into the global aerospace industry and is the main strategic supplier of titanium products for many companies.
"NPK" is research and production company- “Uralvagonzavod”, JSC named after F. E. Dzerzhinsky heads an integrated structure that unites about 40 industrial enterprises, research institutes and design offices in Russia and Europe. "NPK" “Uralvagonzavod”, JSC includes metallurgical, car assembly, mechanical assembly, mechanical repair, tool and other production, allowing to provide a closed production cycle.
The general partners of "NPK" “Uralvagonzavod”, JSC are the largest domestic transportation companies, as well as the Ministry of Defense of the Russian Federation and "Rosobornexport".
"United Engine Corporation" JSC is an integrated structure that produces engines for military and civil aviation, space programs, gas turbine units of various capacities for the production of electric and thermal energy, gas pumping and ship gas turbine units.
"Russian Helicopters" is one of the world leaders in the helicopter industry, the only developer and manufacturer of helicopters in Russia, as well as one of the few companies in the world with the capabilities of designing, manufacturing, testing and maintenance of the modern civil and military helicopters.
RT-Techpriemka successfully cooperates with the holding for a long time and has provided the production of 100000 tons
Russian Aircraft Corporation "MiG", JSC is a subject of military- technical cooperation. The leading Russian industrial corporation for the development, production, sale, logistics support of the aircrafts.
The product range of RAC "MiG" includes modern fighter-interceptors, multifunctional combat aircrafts, including newly developed fighters of the unified family MiG-29K / KUB, MiG-29M / M2 and the latest MiG-35, training equipment, as well as general purpose light aircrafts. Designers of the RAC "MiG" are intensively working on the creation of a new generation of aircraft, both manned and unmanned. RAC "MiG" works effectively in almost all markets around the world.
Supply of finished goods, materials and semi-finished goods for military, dual and civil purposes
Exclusion of the possibility of supplying counterfeit and non- certified products.
Decrease of the price and delivery time due to the consolidation of volumes, delivery variability.
A large component list of supplied certified products with quality control.
The main long-term business partners among the manufacturing plants are:
RT-Techpriemka delivers materials and supplies to the businesses